Question 1

Micrometre

Accepted Answer

A high-precision measuring instrument used to measure wall thickness and the outer diameters of tubes.
Measurements are reported in millimetres, covering different ranges, e.g. 0mm - 25.4mm, 25.4mm - 50.8mm, 50.8mm-76.20mm, 76.20mm-101.60mm

Question 2

Digital Verniers

Accepted Answer

A high-precision measuring instrument used in our factory to measure interiors, exteriors, and the depth features on laser cut parts.

Question 3

Go / No-Go Plain Plug Gauges

Accepted Answer

A PPG is a plain plug-checking gauge with two plug ends:

NO GO end : Should never protrude into the measured feature.
GO end: Should always protrude through the measured feature.

Question 4

Linear Digital Scale

Accepted Answer

A high-precision measuring instrument used to measure overall tube lengths up to 3000mm (3 metres).

Question 5

Tape Measures

Accepted Answer

A commonly used measuring instrument with centimeter-millimeter accuracy, utilised on our production lines to measure tube lengths typically exceeding 3 meters.

Question 6

Set Square Gauge

Accepted Answer

Used to check and ensure that tube corners are properly squared during fabrication and to verify surface flatness on the square and rectangular faces of manufactured tubes.

Question 7

Bespoke Gauges

Accepted Answer

Custom-made gauges are designed to check special tube shapes and dimensional features requiring tight tolerances.
Manufactured and checked against specific design requirements.

Question 8

Digital Protractor

Accepted Answer

It is a precision measuring instrument that accurately measures laser cut angles on tubes.

ERW Tube & Laser Cutting Expert Guide

Laser Cutting in Industry

Applications and Advantages of Structural Tubular Steel

What is Automotive Laser Cutting?

What Is Structural Metalwork?

Laser Cutting in the Medical Industry

How is ERW Tube Used in Industry?

Tube Laser Cutting Step-by-Step Process

What Is An ERW Tube Mill?

What Is Tube Laser Cutting?